Cone Mounted Cable Blades – 4″ to 8″ length
$7.00 – $57.00
These blades fit 1/2″ to 3/4″ cable, attached with cone-style chuck unit. Shorter blades are available with plain (knife) or toothed (serrated) edges. 6″ and 8″ lengths have plain edge only.
Standard unit is unmounted (blade only)
Or choose to include threaded (ME) or slip-joint (SJ) mounting block
Order 12 or more blades, and save .25 each! (discount will be reflected in cart)
Description
Our larger cone mounted cable blades fit 1/2″ to 3/4″ cable, attached with cone-style chuck unit. Used to cut obstructions or scraping pipes clean in sewer and drain cleaning.
Choose from 4 options:
3″ to 4″ length – narrow 3/4″ wide blade Can be adjusted in the cone to 3″ or 4″ length, available with knife edge (P) or serrated edge (T).
- Part numbers: loose – KN6-3/4P, KN6-3/4T | single blade in chuck – KN75P, KN75T | two blades in chuck – KN76P, KN76T
3″ to 4″ length – 1″ wide blade Can be adjusted in the cone to 3″ or 4″ length, available with knife edge (P) or serrated edge (T).
- Part numbers: loose – KN6-1P, KN6-1T | single blade in chuck – KN75-1P, KN75-1T | two blades in chuck – KN76-1P, KN76-1T
6″ long – 1″ wide blade available with knife edge (P) only
- Part numbers: loose – KN7P | two blades in chuck – KN77P
8″ long – 1″ wide blade available with knife edge (P) only
- Part numbers: loose – KN8P | two blades in chuck – KN78P
You may also consider our 4″ triple blade in chuck.
MyTana manufactures a wide selection of sewer and drain cleaning equipment, ends and parts. See our Blog for more information of interest to Plumbers and Drain Cleaners!