MyTana Penetrating Thrust Jetter Nozzle

Penetrating Thrust Nozzle

$33.00$43.00

3 rear jets at a 25° thrust angle gives you maximum pulling power in runs more than 150’. A forward jet lets you work through shorter plugged lines too.

Available in 4 NPT sizes, available specs are listed for each size:

  • 1/8″ I.D. – 2 GPM @ 1500 PSI only
  • 1/4″ I.D. – 2 GPM @ 1500 PSI   -or-  4.5 GPM @ 3000 PSI
  • 3/8″ I.D. – 4.5 GPM @ 3000 PSI   -or-  8 GPM @ 3000 PSI
  • 1/2″ I.D. – 8 GPM @ 3000 PSI only
Clear

Description

High-pressure Penetrating Thrust nozzle has 1 forward jet and 3 rear jets at 25°. This nozzle gives you maximum pulling power while boring through blockages. Button style nozzle is good for general drain cleaning while maneuvering elbows and tees. Precision machined, hardened stainless steel (heat treated).

MyTana Nozzles are tuned to deliver the rated pressure and flow when used with our Jetters. If you need different specs, give us a call.

The Penetrating Thrust nozzle is available in 6 different NPT size/GPM configurations:

TN3:  1/8″ I.D.
•  2 GPM @ 1500 PSI

MN3:  1/4″ I.D.
•  2 GPM @ 1500 PSI
•  4.5 GPM @ 3000 PSI

LN3:  3/8″ I.D.
•  4.5 GPM @ 3000 PSI
•  8 GPM @ 3000 PSI

NZ3:  1/2″ I.D.
•  8 GPM @ 3000 PSI

If you are interested in a variety of different nozzles, this penetrating thrust nozzle is also included in our Nozzle Kits. Check them out!

See our Blog for more information of interest to Plumbers and Drain Cleaners.